AASTRA 7446ip (5446ip) for MD Evolution User Guide EN - Manual (Page 22)

Dialog 5446 IP Premium
Switch from
headset to
speakerphone
Press .
2.7 Headset
2.7.1 Using the Headset
Using a headset enables you to make and receive calls without using the
handset.
Make a call
Press and dial the desired number and. In headset
preset mode, you are not required to press the headset
key.
Receive a call
Press .
Switch from
headset to handset Lift the handset.
Switch from
handset to headset
Press and replace the handset.
Clear a call Press the C key.
2.7.1.1 Call Handling Via the Line Buttons
By default, the phone is set to connect calls to the loudspeaker when you
answer incoming calls, or when you make calls by tapping a Line button. This
default setting is known as the loudspeaker preset mode. When you dial a
number without lifting the handset, the call is also connected to the loudspeaker
by default.
When you use a headset, you can switch to the headset preset mode to have
calls connected to the headset. If the headset preset mode is activated and you
press , the call is connected to the loudspeaker.
Activating Headset
Preset Mode To activate the headset preset mode, press and hold
down
for 4 seconds. When you hear a short ring
signal, and the headset icon appears in the display to
the right, the headset preset mode is activated.
Deactivating
Headset Preset
Mode To deactivate the headset preset mode, press and hold
down for 4 seconds. When you hear a short ring
signal, and when the headset icon disappears from
the display to the right, the headset preset mode is
deactivated.
16 7/1553-DBC 446 01 Uen B4 2008-09-16