AASTRA 7446ip (5446ip) for MD Evolution User Guide EN - Manual (Page 21)

Dialog 5446 Description
flashing. The silent ringing mode remains active until you press any key. The
silent ringing mode is indicated by the mute icon, .
2.6 Handset And Speakerphone
2.6.1 Handsfree
Most features are described using the handset. However, you can answer and
make calls without using the handset.
2.6.2 Using the Handset And the Headset
In handsfree mode, you do not lift the handset to start a procedure, and instead
of replacing the handset after a call, you press the C key (Clear).
Note: Everything that works with the handset, also works with the headset.
2.6.3 Using the Speakerphone
Using handsfree with the loudspeaker enables you to dial a number, and
monitor the progress of a call.
Note: Make sure that the phone is placed on a flat surface, otherwise the
handsfree feature may not work properly.
Answer a call Tap the line button that indicates an incoming call (the
button’s light indicator is blinking).
Make a call Dial the number you want to call. When someone
answers, the speakerphone is activated. You can
then either pick up the handset, or continue to use the
speakerphone.
Clear a call Press the C key.
Switch from
speakerphone to
handset Lift the handset.
Switch from
handset to
speakerphone
Press and replace the handset.
Switch from
speakerphone to
headset
Press .
15 7/1553-DBC 446 01 Uen B4 2008-09-16