Garmin G1000 Mooney M20TN - Manual (Page 57)

190-00647-02 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 43
FLIGHT INSTRUMENTS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
NOTE: Refer to the AFMS for Vspeed values.
Vspeeds (Glide, V
R
, V
X
, and V
Y
) can be changed and their flags turned on/off from the Timer/References
Window. When active (on), the Vspeeds are displayed to the right of the airspeed scale. All Vspeed values
are reset and all flags turned off during power up.
Changing Vspeeds and turning Vspeed flags on/off:
1) Press the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the field of the desired Vspeed to be changed.
3) Use the FMS Knob to enter the desired value. When a speed has been changed from a default value, an asterisk
appears next to the speed.
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF field.
5 ) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.
Timer/References Menu Timer/References Window
Figure 2-4 Timer/References Window and Menu
Turning all Vspeed flags on/off:
1) Press the TMR/REF Softkey.
2) Press the MENU Key.
3) To activate all Vspeed flags, press the ENT Key with All References On highlighted.
4) To remove all Vspeed flags, turn the FMS Knob to highlight All References Off and press the ENT Key.
Restoring all Vspeed defaults:
1) Press the TMR/REF Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight Restore Defaults and press the ENT Key.