Altitude display, Traffic map page display range, Hazard avoidance – Garmin G1000 Mooney M20TN User Manual
Page 353
190-00647-02 Rev. A
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
339
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
ALTITUDE DISPLAY
The Pilot can select the volume of airspace in which traffic is displayed. Traffic Advisories (TAs) outside of
these limits will still be shown. Refer to the SKY497 Pilot’s Guide for specific display thresholds.
Changing the altitude display mode:
1)
On the Traffic Page, press the ALT MODE Softkey.
2)
Press one of the following Softkeys:
•
BELOW
•
NORMAL
•
ABOVE
•
UNREST (unrestricted)
3)
To return to the Traffic Page, press the BACK Softkey.
Or
:
1)
Press the MENU Key.
2)
Turn the small
FMS Knob to select one of the following:
•
BELOW
•
NORMAL
•
ABOVE
•
UNREST (unrestricted)
3)
Press the ENT Softkey.
TRAFFIC MAP PAGE DISPLAY RANGE
The display range on the Traffic Map Page can be changed at any time. Map range is adjustable with the
RANGE Knob from 2 to 12 nm, as indicated by the map range rings.
Changing the display range on the Traffic Page:
1)
Turn the RANGE Knob.
2)
The following range options are available:
•
2 nm
•
2 and 6 nm
•
6 and 12 nm