Garmin G1000 Mooney M20TN - Manual (Page 495)

190-00647-02 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
481
APPENDIX b
SD CARD USE
The G1000 System uses Secure Digital (SD) cards to load and store various types of data. For basic flight
operations, SD cards are required for database storage as well as Jeppesen aviation and ChartView database
updates.
CAUTION: Do not load Jeppesen navigation data (except ChartView) onto Garmin Supplemental Data
Cards.
JEPPESEN DATAbASES
The Jeppesen aviation database is updated on a 28-day cycle. The ChartView database is updated on a 14-
day cycle. If the ChartView database is not updated within 70 days of the expiration date, ChartView will no
longer function.
Both these databases are provided directly from Jeppesen. The ChartView database should be copied to the
Garmin supplied Supplemental Data Card which will reside in the bottom card slot on the MFD. The aviation
database must be installed from the Jeppesen or user supplied SD data card. Contact Jeppesen (www.jeppesen.
com) for subscription and update information.
NOTE: After the aviation database is installed, the card may be removed.
Upd ating the Jeppesen aviation database:
1) With the G1000 System OFF, insert the SD card containing the aviation database update into the top card slot
of the PFD to be updated (Label of SD card facing left).
2) Turn the G1000 System ON. A prompt similar to the following is displayed in the upper left corner of the PFD:
Figure B-1 Database Update Prompt
3) Press the ENT Key to start the database update. A prompt similar to the following is displayed:
Figure B-2 Database Update Confirmation