Hazard avoidance, Cell movement – Garmin G1000 Mooney M20TN User Manual
Page 301
190-00647-02 Rev. A
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
287
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
CELL MOVEMENT
Cell Movement data (Figure 6-20) shows the location and movement of storm cells as identified by the
ground-based system. Cells are represented by yellow squares, with direction of movement indicated with
short, orange arrows.
Figure 6-20 Cell Movement Data
Storm Cells
On most applicable maps, Cell Movement data is selected for display along with NEXRAD. On the Weather
Data Link Page, Cell Movement data can be selected independently. Cell Movement data can be displayed
on the following maps:
• PFD Inset Map
•Navigation Map
• AUX - Trip Planning Page
• Nearest Pages
Displaying Cell Movement information:
1)
Press the MAP Softkey (for the PFD Inset Map, press the INSET Softkey). This step is not necessary on the
Weather Data Link Page.
2)
Press the NEXRAD Softkey (CEL MOV Softkey on the Weather Data Link Page). For Cell Movement to be
displayed on maps other than the Weather Data Link Page, Cell Movement must be turned on in the Navigation
Map Setup Menu (see “Setting Up XM Satellite Weather”).
To display the Cell Movement legend on the Weather Data Link Page, (Figure 6-21), press the LEGEND
Softkey when Cell Movement is selected for display.
Figure 6-21 Cell Movement Legend