English installing an expansion card – ASRock 990FX Extreme9 User Manual

Page 19

Text mode
Original mode

ASRock 990FX Extreme9 Motherboard

English

Installing an expansion card

Step 1.

Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2.

Remove the system unit cover (if your motherboard is already installed
in a chassis).

Step 3.

Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.

Step 4.

Align the card connector with the slot and press firmly until the card is
completely seated on the slot.

Step 5.

Fasten the card to the chassis with screws.

Step 6.

Replace the system cover.