RIDGID micro DL-500 - Manual (Page 7)

micro DL-500 Self-Leveling 5-Dot Laser
5
– Contact RIDGID Technical Services De part-
ment at rtctechservices@emer son.com, or
in the U.S. and Canada call (800) 519-3456.
Description, Specifications
and Standard Equipment
Description
The RIDGID micro DL-500 Self-Leveling 5-Dot
Laser is a professional laser. The laser simulta-
neously projects five laser beams (up, down,
front, left and right directions) for plumb and
level applications. It is primarily for use in-
doors, but may be used outside depending
on light conditions.
The self-leveling laser has a multi-functional
magnetic base for attaching to a tripod or
steel surfaces. The laser itself can swivel 360
degrees.
The laser self-levels within a range of ±4.5°.
The laser beam will flash and an intermittent
beep will sound if the laser is outside of its
leveling range. The laser features a magnetic
dampened compensation system to main-
tain level even when affected by vibration on
the job site.
The laser has a locking mechanism built into
the ON/OFF switch to hold the internal com-
ponents in place to avoid damage during
transport and storage. The laser is powered
by three AA Alkaline batteries and has a low
battery indicator.
Specifications
Interior Range............ Up to 100 ft (30 m)
depending upon Light
Conditions
Accuracy....................... ± 1 /
8
" / 50 ft
(± 2 mm / 10 m)
Self-Leveling
Range.......................... ± 4.5°
Laser
Classification.............. Class 2
Laser
Wavelength................ 630 nm – 670 nm
Maximum Power
Output.......................... ≤1 mW
Power Supply............. 3 × AA Alkaline
Batteries
Operating
Temperature............... 14°F to 113°F
(-10°C to 45°C)
Standard Equipment
The RIDGID micro DL-500 Self-Leveling
5-Dot Laser includes the following items:
• micro DL-500 Self-Leveling 5-Dot Laser
• Multi-Functional Magnetic Base
• 3 x “AA” Alkaline Batteries
• Magnetic Target
• Mounting Strap
• Laser Viewing Glasses
• Carrying Case
• Operator’s Manual and CD
NOTICE This equipment is used to define
plumb and level references. Incorrect use
or improper application may result in non-
plumb or level references. Selection of ap-
propriate methods for the conditions is the
responsibility of the user.
Figure 1 - RIDGID micro DL-500 Self-Level-
ing 5-Dot Laser
Protection
Rating............................ IP 55
Dimension................... 3.15" Ч 3.86" Ч 4"
(80 mm × 98 mm ×
101 mm)
Weight.......................... 1.1 lbs (0,5 kg)
Mounting Screw
Thread.........................
1
/
4
" - 20 & 5 /
8
" - 11