Delta DVP-0204520-03 - Manual (Page 9)

DeviceNet Network Scanner DVPDNET-SL
3 Installation
3.1 Connecting DVPDNET-SL to DVP-SV MPU
„ Adjust the extension clip on the left side of DVP-SV.
„ Meet the extension port of the MPU with DVPDNET-SL as shown in the figure below.
„ Fasten the extension clip.
DVPDNET DVP28SV
RUN
STOP
3.2 Installing DVPDNET-SL and DVP-SV MPU on DIN Rail
„ Use 35mm DIN rail.
„ Open the DIN rail clip on DVP-SV and DVPDNET-SL. Insert DVP-SV and DVPDNET-SL onto the DIN
rail.
„ Clip up the DIN rail clips on DVP-SV and DVPDNET-SL to fix DVP-SV and DVPDNET-SL on the DIN rail,
as shown below.
DVPDNET
35mm DIN rail
DVP28SV
RUN
STOP
DVP-PLC Operation Manual 6