Delta DVP-0204520-03 - Manual (Page 39)

DeviceNet Network Scanner DVPDNET-SL
2) Configuration of DeviceNet Master
1> Double click on DNET Scanner (node 01), and the “Scan Module Configuration..." dialog box will
appear. You can find the currently available nodes, RTU-DNET and VFD-B Drives 230V 3HP, in
the list on the left side. On the right side, there is an empty “Scan List”.
2> (2) Move the slave devices on DeviceNet in the "Available Nodes” list on the left side to the "Scan
List” on the right side. Select a node and click on
>
. Follow the steps to move all the nodes to the
scan list.
DVP-PLC Operation Manual 36