Delta DVP-0204520-03 - Manual (Page 32)

DeviceNet Network Scanner DVPDNET-SL
3) Set up the communication parameters in the PC and DVP-SV, e.g. the communication port, address, baud
rate and communication format. Click on “OK” after configuration is finished.
Item Function Default
COM Port COM port on the PC to be used to communicate
with DVP-SV
COM1
Address Communication address of DVP-SV 01
Baud rate Communication speed between the PC and
DVP-SV
9,600 (bps)
Data Bits 7
Parity Even Parity
Stop Bit
Communication protocol between the PC and
DVP-SV
1
Mode
Communication mode between the PC and
DVP-SV
ASCII
4) Select “Network” => "Online” and the “Select Communication Channel” dialog box will appear. Click on “OK”
to start scanning the entire DeviceNet network.
5) After scanning is successful, right click DNET (Slave) to select “Parameter editing”.
DVP-PLC Operation Manual 29