Delta DVP-0204520-03 - Manual (Page 36)

DeviceNet Network Scanner DVPDNET-SL
3> Select “Network” => "Online”, and the “Select Communication Channel” dialog box will appear.
Clicking on “OK” starts scanning the DeviceNet network.
4> If the bar on the dialog box does not progress, it means the connection between the PC and DVP-SV
is abnormal, or there are other programs also using the COM port on the PC. After the scan is
completed, the dialog box will tell you that the scan is completed, and the icons and device names of
all the nodes scanned on the network will be shown on the screen. See the figure below, in which the
node address of DVPDNET-SL and RTU-DNET are 01 and 02 respectively.
DVP-PLC Operation Manual 33