ZyXEL Communications PRESTIGE 153 - Manual (Page 75)

Prestige 153/153X WAN Bridge/Routers
Remote Node Configuration 4-3
Table 4-1 contains the instructions on how to configure the Remote Node Menu for dial-up lines.
Table 4-1. Remote Node Profile Menu Fields for Dial-up Lines
Field Description Options
Rem Node Name This is a required field [?]. Enter a descriptive name for
the remote node, e.g., Corp.
This field can be up to eight characters. This name must
be unique from any other remote node name or remote
dial-in user name.
Active Press the space bar to toggle between [Yes] and [No].
Inactive nodes are displayed with a minus sign (-) at the
beginning of the name in Menu 11.
Press space
bar to toggle
[Yes/No]
Connection Type Use the space bar to toggle between [Switch] and
[Leased]. If [Leased] is selected, moving the cursor to the
next field will bring you to Submenu 11.1.2 for leased line
configuration. Press space
bar to toggle
[Switch/Leased]
l If this parameter is set to [Both], your Prestige can
both place and receive calls to/from this remote
node. [Both]
l If set to Incoming, your Prestige will not place a call
to this remote node. [Incoming]
l If set to Outgoing, your Prestige will drop the calls
from this remote ode. [Outgoing]
Call Direction
Several other fields in this menu depend on this
parameter. For example, in order to enable [Call Back],
the Call Direction must be [Both].