ZyXEL Communications PRESTIGE 153 - Manual (Page 157)

Prestige 153/153X WAN Bridge/Routers
System Maintenance 13-7
13.3.2 Syslog And Accounting
The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record) and system
messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 - System
Maintenance - Syslog and Accounting, as shown in Figure 13-6.
Figure 13-6. Menu 24.3.2 - System Maintenance - Syslog and Accounting
You need to configure the following 3 parameters described in Table 13-2 to activate syslog.
Table 13-2. System Maintenance Menu Syslog Parameters
Parameter Description
Active Use the space bar to turn on or off the syslog.
Syslog IP Address Enter the IP Address of your syslog server.
Log Facility Use the space bar to toggle between the 7 different Local options. The log
facility allows you to log the message in different files in the server. Please refer
to your UNIX manual for more detail.
Menu 24.3.2 -- System Maintenance - Syslog and Accounting
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.