ZyXEL Communications PRESTIGE 153 - Manual (Page 148)

Prestige 153/153X WAN Bridge/Routers
11-6 Telnet Configuration
11.2.2.1 The Key Field
The “key”, or password, must match that in the client file in the RADIUS server’s
/etc/raddb directory, as shown in the following example:
# Client Name Key
#-------------------------
192.168.1.1 1234
After you configure a RADIUS server, your Prestige will use it to authenticate all users that it can
not find in its internal dial-up user list (see Menu 14)
11.2.3 Adding Users to the RADIUS Database
To add a user to the RADIUS database, edit the users file in the RADIUS server’s /etc/raddb
directory, and add a line similar to the following:
Joeuser Password = “joepassword”
11.2.4 Using RADIUS Authentication for CLID
To use RADIUS for CLID authentication, create a user record in the users file where the user
name (the first field) is the telephone number, and the password (the second field) is always
Zyxel-CLID (case-sensitive). The regular user name is put in a User-Name field. The following
is an example of a CLID user record:
5551212 Password = “Zyxel-CLID”
User-Name = ”joeuser”
Zyxel-Callback-Option = Mandatory
Zyxel-Callback-Phone-Source = Preconfigured
Dialback-No = “5551212”
Note that if CLID is turned off in your Prestige, you need to have a separate user record for
joeuser so the regular user name/password mechanism still works.