ZyXEL Communications PRESTIGE 153 - Manual (Page 39)

Prestige 153/153X WAN Bridge/Routers
Hardware Installation & Initial Setup 2-9
The SMT displays the Main Menu, as shown in Figure 2-5.
Figure 2-5. SMT Main Menu
The following table shows the Main Menu Summary
Table 2-3. Main Menu Summary
# Menu Title Description
1 General Setup Use this menu to setup general information and enable routing or bridging
of specific protocols.
2 WAN Setup Use this menu to setup WAN port configuration.
3 Ethernet Setup Use this menu to setup Ethernet configuration.
4 Internet Access Setup A quick and easy way to setup Internet connection.
11 Remote Node Setup Use this menu to setup the remote node for LAN-to-LAN connection,
including Internet connection. Prestige supports up to four remote nodes.
12 Static Routing Setup Use this menu to setup static route for different protocols. There are four
static routes for each protocol.
13 Default Dial-in Setup Use this menu to setup default dial-in parameters so that your Prestige
can be a dial-in server for the remote node and Remote Dial-in User.
14 Dial-in User Setup Setup Remote Dial-in User. Prestige has eight Remote Dial-in Users.
21 Filter Set Configuration Setup filters to be used in Menu 3 and Menu 11 to provide security, call
control, etc.
22 SNMP Configuration Use this menu to setup SNMP related parameters
23 System Security Use this menu to setup security related parameters.
24 System Maintenance Provides system status, diagnostics, firmware upload, etc.
99 Exit To exit from SMT and return to the blank screen.
Copyright (c) 1994 - 1997 ZyXEL Communications Corp.
Prestige 153 Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. Ethernet Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
13. Default Dial-in Setup
14. Dial-in User Setup
Advanced Management
21. Filter Set Configuration
22. SNMP Configuration
23. System Security
24. System Maintenance
99. Exit
Enter Menu Selection Number: