ZyXEL Communications PRESTIGE 153 - Manual (Page 36)

Prestige 153/153X WAN Bridge/Routers
2-6 Hardware Installation & Initial Setup
2.4 Power On Your Prestige
At this point, you should have connected the console cable, the WAN devices, the Ethernet cable,
and the power supply. You can now power on your Prestige by plugging the AC adapter to a
power outlet of correct voltage.
Step 1. Initial Screen
When you power on your Prestige, the router performs several internal tests and initializes the
WAN devices. After the initialization, the Prestige asks you to press [Enter] to continue, as
shown in Figure 2-3.
Figure 2-3. Power-On Display
Copyright (c) 1994 - 1997 ZyXEL Communications Corp.
ethernet address: 00:a0:c5:01:23:45
Wan port init ... done
Modem 0 init . inactive
Modem 1 init . inactive
Modem 2 init . inactive
Press ENTER to continue...