ZyXEL Communications PRESTIGE 153 User Manual
Page 116
Prestige 153/153X WAN Bridge/Routers
7-6
Bridging Setup
The following Table 7-3 describes the Bridge Static Route Menu.
Table 7-3.
Bridge Static Route Menu Fields
Field
Description
Route Name
Enter a name for the bridge static route for identification purposes.
Active
Indicates whether the static route is active or not.
Ether Address
Enter the MAC address of the destination machine that you wish to bridge the packets
to.
IP Address
If available, enter the IP address of the destination machine that you wish to bridge the
packets to.
Gateway Node
Enter the number of the remote node that is the gateway of this static route. When a
packet’s destination Ethernet (MAC) address matches the value entered above, it will
trigger a call to this remote node.
Once you have completed filling in this menu, press [Enter] at the message [Press ENTER to Confirm…]
to save your configuration, or press [Esc] to cancel.