ZyXEL Communications PRESTIGE 153 - Manual (Page 149)

Prestige 153/153X WAN Bridge/Routers
Telnet Configuration 12-1
Chapter 12
Telnet Configuration and Capabilities
12.1 About Telnet Configuration
Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the
console port. Once your Prestige is configured, you can use telnet to configure it remotely as
shown in Error! Reference source not found..
Figure 12-1. Telnet Configuration on a TCP/IP Network
If your Prestige is configured for IPX but not IP routing in Menu 1, telnet is still available
provided you assign the Prestige a correct IP address and subnet mask. When IP routing is
disabled, the Prestige can still function as a host.
12.2 Telnet Under SUA
When Single User Account (SUA) is enabled and an inside server is specified, telnet connections
from the outside will be forwarded to the inside server. So to configure the Prestige via telnet
Modem / ISDN TA
Ethernet LAN
Prestige with
Network IP Address
Telnet from any station
on the Network
Telnet from any
Remote Location
TCP/IP Network
Modem
ISDN TA
Modem/ISDN TA
Modem / ISDN TA
56 Kbps
56 Kbps
PSTN/ISDN Network
PSTN Network
(Telephone Line)
Prestige 128MH