ZyXEL Communications PRESTIGE 153 User Manual
Page 62
Prestige 153/153X WAN Bridge/Routers
3-6
Internet Access
Follow Table 3-2 to configure TCP/IP parameters for the Ethernet port.
Table 3-2.
TCP/IP Ethernet Setup Menu Fields
Field
Description
Example
TCP/IP Setup
IP Address
Enter the IP address of your Prestige in dotted decimal notation.
192.168.1.1
(default)
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the value computed by the Prestige.
255.255.255.0
RIP Direction
Press the space bar to select the RIP direction among [Both]/[In
Only]/[Out Only]
[Both]
(default)
Version Press the space bar to select the RIP version among [RIP-1]/[RIP-
2B]/[RIP-2M] .
[RIP-1]
(default)
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save
your configuration, or press [Esc] at any time to cancel.