Xerox DocuColor 5000 - Manual (Page 88)

DocuColor 5000 Administrator Guide 3-30
3. Profiles
Aligner Roll Pressure
Use this feature with paper types that slip and skew or have
damaged edges.
Examples:
•
Some coated paper types slip and skew, thereby
misregistering the image on the output prints. In this case, you
may want to increase the roll pressure in order to compensate
for the slippage and skewing.
• Some light-weight papers may have too much roll pressure
applied to them, thereby causing edge damage to the output
prints. In this case, you may to decrease the roll pressure.
• If you are experiencing numerous 8-154 faults, increase the
roll pressure and continue to run the digital press.
TIP:
Increasing the roll pressure for numerous 8-154 faults,
allows you to postpone a service call. However, call your service
representative as soon as possible in order to restore the digital
press to its full feeding capabilities.