Xerox DocuColor 5000 - Manual (Page 72)

DocuColor 5000 Administrator Guide 3-14
3. Profiles
Custom Paper
Different media (including paper type, weight, and coating/
uncoating) may require specific handling by the digital press as it
is moving through the paper path. For example, some media
types may skew or curl as they progress through the printing path
of the digital press. This may occur on frequently-run jobs and/or
jobs with a high volume output.
The Custom Paper feature allows you set custom paper profiles
for different types of media and jobs, such as outlined in the above
paragraph. These profiles may be used at point of need in order
to ensure optimum output quality of your prints/jobs.
By setting custom paper profiles for specific media types, you can
avoid output prints that are skewed, curled, have too much toner
or not enough toner in areas, or images that are not registered
properly on the output print, such as Side 1 and/or Side 2 images
that are misregistered.
NOTE 1: Once a Custom Paper Profile is created, the digital press
passes this information on to your color server. The color server
in turn reflects this information in the print options for print jobs.
NOTE 2: Adjusting registration for Side 1 and/or Side 2 images is
discussed in detail in the Alignment feature. Refer to the
Alignment feature.