Xerox DocuColor 5000 - Manual (Page 49)

DocuColor 5000 Administrator Guide 2-19
2. System Settings
NVM Read/Write
Your Xerox service representative uses this feature to change
certain system settings. It also may occasionally be used by
system administrators.
Under most conditions, this feature is not used by system
administrators; however, there are limited circumstances under
which this feature is used. These circumstances include:
Special Media Setting for
Drilled Papers
If you use 3-hole, predrilled paper on a regular basis and
continually encounter an inordinate amount of paper jams, and/or
Special Media Setting for
LEF Tab Stock
If you regularly run tab stock and continually encounter paper
jams.
Carbonless Media
Enablement
• Carbonless papers are coated with several functional coatings
which promote the image transfer through the form set and
enable the form sets to separate appropriately after padding
with a special adhesive. Each supplier of xerographic
carbonless paper has developed their own unique chemistry,
which is why the following procedure enabling this application,
works best with Xerox Premium Digital Carbonless Paper.
• In order to avoid problems when running carbonless media,
you may use the NVM Read/Write feature to switch on the
carbonless media feature.
If any of the above conditions exist in your environment, you may
use the NVM Read/Write feature to switch on a feature.
CAUTION:
Do not enter any numbers on this screen other than
the ones described in this procedure. Entering and saving
numbers, other than the ones described, changes the system
settings which may result in a service call to restore the system to
the correct settings.