Xerox DocuColor 5000 - Manual (Page 82)

DocuColor 5000 Administrator Guide 3-24
3. Profiles
Running test prints
19.
Select the
Test Print
button; a new window opens.
a. Select the
2 Sided
button.
NOTE: If you want to check the registration for 1 Sided
prints only, select the 1 Sided button.
b. Select
10
test prints by clicking the
Up
arrow button to
change the number of test prints generated.
c. Select the desired paper tray from the pull-down list.
d. If necessary, select the Tray Properties button and
make any desired settings.
e. Select Start. The UI displays this message after the
test prints are printed:
f. Retrieve your prints.
g. Discard the first few prints, as inconsistency tends to
be greater with these images.