Xerox DocuColor 5000 - Manual (Page 77)

DocuColor 5000 Administrator Guide 3-19
3. Profiles
Selecting other options for your Custom Paper profile
11.
If required, select a Decurler Profile from the pull-down
menu.
TIP:
The default setting is System Default. It is recommended
that you leave this option at its default setting until you run test
prints and evaluate the output of the prints. Test Print is discussed
in more detail in Running test prints .
NOTE: Use the Decurler feature in order to compensate for paper
curl in your output prints. For Decurler information, refer to
page 3-32.