Xerox DocuColor 5000 - Manual (Page 29)

DocuColor 5000 Administrator Guide 1-3
1. Administrator overview
Finishing System Profiles overview
If your digital press has an optional, third-party, Digital Finishing
Architecture (DFA) device finishing, then the
Finishing System
Profiles
option is available to you.
TIP:
This feature is available
only
if you are logged on as the
Administrator.
Once your system is configured for the optional finishing
accessory, the Finishing System Profiles option is accessed from
the System pull-down menu on the main UI screen.
TIP:
This window is ready-only; you cannot change the
information shown on this screen. If you have more than one
finishing device connected to your digital press, you can select the
desired profile from the pull-down menu at the upper-left portion of
the Finishing System Profiles window.