Zebra Technologies Z SERIES 79695L-002 - Manual (Page 20)

Introduction
Control Panel 20
79695L-002 Rev. A Z Series ® /RZ™ Series User Guide 6/6/08
Control Panel Buttons
Table 1 • Control Panel Buttons
Button Function
FEED Forces the printer to feed one blank label each time the button is pressed.
• Printer not printing: one blank label immediately feeds.
• Printing: one blank label feeds after the current batch of labels is complete.
PAUSE Starts and stops the printing process.
• Printer not printing: no printing occurs. (Press PAUSE again to resume printing.)
• Printing: printing stops after the current label is complete.
CANCEL Cancels print jobs when the printer is paused.
• Printer not printing: the next stored label format does not print.
• Printing: current label completes printing, and the next label format is cancelled.
Press and hold for several seconds to cancel all print jobs in memory.
SETUP/EXIT Enters and exits the configuration mode.
SELECT Toggles the function of PLUS (+) and MINUS (–) between the Scroll and Change
Modes.
• Press once to use PLUS (+) and MINUS (–) to change the values of the selection.
• Press again to use PLUS (+) and MINUS (–) to scroll through the menu items.
PLUS ( + )
(scroll mode)
Scrolls to the next selection.
PLUS ( + )
(change mode)
• Increases the value.
• Performs the action on the bottom right of the LCD.
MINUS ( – )
(scroll mode)
Scrolls to the previous selection.
MINUS ( – )
(change mode)
• Decreases the value.
• Moves to the next available digit in a number.
• Performs the action on the bottom left of the LCD.