ZyXEL Communications ZyXEL DMA 1000 - Manual (Page 95)

IES-1000 User’s Guide
IP Commands 12-5
12.2.11 Enable Command
Your telnet session disconnects when you change the Ethernet port’s IP address. Initiate a
telnet session to the new IP address in order to reconnect.
Syntax:
192.168.1.1 ip> enable [ [mtu ] []]
where
= The name of an interface (“ether” for this device).
[mtu ] = Maximum Transmit Unit. The maximum packet size that this interface is to
send.
= The IP address of the device’s interface.
This command sets the Ethernet port’s IP address and the largest packet size that this interface sends.