ZyXEL Communications ZyXEL DMA 1000 - Manual (Page 60)

IES-1000 User’s Guide
7-10 ADSL Commands
Port 3, Profile : DEFVAL
Port 4, Profile : debug
Port 5, Profile : DEFVAL
Port 6, Profile : DEFVAL
Port 7, Profile : DEFVAL
Port 8, Profile : DEFVAL
This display shows that there are two profiles (DEFVAL and debug) and that port 4 belongs to the debug profile
while ports 1, 2, 3, 5, 6, 7 and 8 belong to the DEFVAL profile.
7.5.15 Show Profile Command
Syntax:
192.168.1.1 adsl> show profile
where
= A profile name.
The show profile command displays the settings of an ADSL profile.
An example is shown next.
192.168.1.1 adsl> show profile debug
#Entry type : adslLineConfProfileEntry
ConfProfileName : debug
AtucConfTargetSnrMgn : 6 db
AtucConfMaxSnrMgn : 31 db
AtucConfMinSnrMgn : 0 db
AtucChanConfInterleaveMinTxRate : 32 Kbps
AtucChanConfInterleaveMaxTxRate : 8000 Kbps
AturConfTargetSnrMgn : 6 db
AturConfMaxSnrMgn : 31 db
AturConfMinSnrMgn : 0 db
AturChanConfInterleaveMinTxRate : 32 Kbps
AturChanConfInterleaveMaxTxRate : 800 Kbps
ConfProfileRowStatus : active(1)
This display shows that the maximum upstream transmission rate is set to 800 kbps and the maximum
downstream transmission rate is set to 8000 kbps. The ConfProfileRowStatus displays active; this
means that the profile is available for use. It does not mean that the profile has been applied to any of the ports.