ZyXEL Communications ZyXEL DMA 1000 - Manual (Page 42)

IES-1000 User’s Guide
6-4 G.SHDSL Commands
6.6.6 Lineinfo Command
Syntax:
192.168.1.1 gshdsl> lineinfo
where
= A port number, from 1 to 8
This command shows the line operating values of a G.SHDSL port.
An example is shown next.
192.168.1.1 gshdsl> lineinfo 2
2=Down Sp=0 Tx=0 Tr=0 Rx=0 Rr=0 NM=0 T=000:00:00
where
<2=Down> = The port number and whether the port is down/up (respectively).
= The line rate.
= The number of frames transmitted.
= The number of frames transmitted with errors.
= The number of frames received.
= The number of frames received with errors.
= The noise margin in decibels.
= The uptime of a port in day:hour:minute format.
6.6.7 Lineperf Command
Syntax:
192.168.1.1 gshdsl> lineperf
where
= A port number, from 1 to 8
This command shows the line performance counters of an G.SHDSL port
An example is shown next.
192.168.1.1 gshdsl> lineperf 7
Port=7 Sp=2048kbps NM=0db ATTEN=0db ES=0 SES=0 LOSWS=0 UAS=0 downN=0
where
= The line rate. If Sp=0, then the connection is down.
= The port number on the SAM1008.
= Noise Margin. The noise margin in decibels.
= Attenuation. The loop attenuation in seconds.
= Errored Second. The total number of one-second intervals when one or more CRC
f d