ZyXEL Communications ZyXEL DMA 1000 - Manual (Page 85)

IES-1000 User’s Guide
IEEE 802.1Q Tagged VLAN Commands 10-9
10.6.7 SVLAN Getentry Command
Syntax:
192.168.1.1 vlan1q> svlan getentry
where
= A VLAN ID. Valid parameter range = [1 – 4094].
This command displays an entry with a specified VLAN ID in the static VLAN table.
Display a Static VLAN Table Entry Example
The following figure is an example display of the following command.
192.168.1.1 vlan1q> svlan getentry 2
Figure 10-5 Example: Svlan Getentry 2 Command Display
10.6.8 SVLAN Delentry Command
Syntax:
192.168.1.1 vlan mgr> svlan delentry
where
= A VLAN ID. Valid parameter range = [1 – 4094].
This command deletes an entry with a specified VLAN ID in the static VLAN table
Delete a Static VLAN Entry Example
The following example will delete entry 2 in the static VLAN table.
192.168.1.1 vlan mgr> svlan delentry 2
10.6.9 DVLAN List Command
Syntax:
192.168.1.1 vlan1q> dvlan list
This command displays the dynamic VLAN registration table. The following figure is an example of what is
displayed when you use this command.
vid port# ad_control tag_control
-------- ------- ------------ ------------
2
1 normal UnTag
2 fixed UnTag
3 normal UnTag