ZyXEL Communications ZyXEL DMA 1000 - Manual (Page 71)

IES-1000 User’s Guide
Bridge Commands 9-5
IGMP version = The version of IGMP being used in the network.
Query Received = The number of query packets received by the IES-1000.
Max Response Time = The longest period of time used to respond to a query packets, measured in
tenths of a second.
Query Interval = The time period between query packets.
9.5.3 Filterage Command
Syntax:
192.168.1.1 bridge> filterage [age]
where
age = The aging out timer period in seconds.
This command sets or shows the aging out timer period of the filtering database. It is recommended that you
use the default setting. If the time interval is set too short, it could increase broadcast traffic and reduce the
available bandwidth.
9.5.4 Flush Command
Syntax:
192.168.1.1 bridge> flush [port]
where
port = A bridge port number.
This command flushes out the filtering database of the specified bridge port. If the field is omitted,
this command will flush out the filtering databases of all ports.
9.5.5 Info Command
Syntax:
192.168.1.1 bridge> info
This command shows the software number of the bridge implementation and the maximum size of the filtering
database.
9.5.6 Ethertype Command
Syntax:
192.168.1.1 bridge> ethertype [ ]
where
= A bridge port number.
any = The filter allows all packet types to be forwarded to and from the specified port.