ZyXEL Communications ZyXEL DMA 1000 - Manual (Page 80)

IES-1000 User’s Guide
10-4 IEEE 802.1QTagged VLAN Commands
10.6.1 VLAN Enable Command
The default for the IEEE 802.1Q Tagged VLAN is disable. Enable the IEEE 802.1Q Tagged VLAN by following
the example shown next.
Syntax:
192.168.1.1 vlan1q> vlan enable
10.6.2 VLAN Disable Command
You can disable the IEEE 802.1Q Tagged VLAN by using the VLAN Disable command.
Syntax:
192.168.1.1 vlan1q> vlan disable
This command disables the IEEE 802.1Q Tagged VLAN.
10.6.3 PVID Command
Syntax:
192.168.1.1 vlan1q> pvid [ ]
where
= A bridge port number. Valid parameter range = [1 - 9].
= The VLAN ID. Valid parameter range = [1 - 4094].