ZyXEL Communications ZyXEL DMA 1000 - Manual (Page 33)

IES-1000 User’s Guide
System Commands 5-3
5.4.1 Uptime Command
Syntax:
192.168.1.1> uptime
This command shows the elapsed time the system has been running since the last reboot.
5.4.2 Version Command
Syntax:
192.168.1.1> version
This command shows the system firmware version and date
5.4.3 Restart Command
Syntax:
192.168.1.1> restart
This command instructs the system to perform a warm start, that is, restarting the system without turning the
power off and on.
5.4.4 Passwd Command
Syntax:
192.168.1.1> passwd
This command changes the management password. The management password is used for authentication at
console or Telnet login. This command is only allowed for local console management sessions. The management
password must be from 1 to 8 characters long and any character is accepted. The factory default password is
“1234”.
It is very important that you remember your password. If you forget it, refer to the
Troubleshooting section for help.
5.4.5 Config Print Command
Syntax:
192.168.1.1> config print
This command lists all current system configuration settings.