beautypg.com

Factory default settings, Ip parameters, Console port – ZyXEL Communications ZyXEL DMA 1000 User Manual

Page 25: Snmp community strings, Console, telnet web configurator and ftp password, G.shdsl ports (sam1008), Chapter 3 factory default settings, 1 ip parameters, 2 console port, 3 snmp community strings

background image

IES-1000 User’s Guide

Factory Default Settings

3-1

This section describes the factory default settings of the IES-1000.

3.1 IP

Parameters

• IP address = 192.168.1.1

• Subnet mask = 255.255.255.0

• Default gateway = 192.168.1.254

3.2 Console

Port

• Baud rate = 9600 bps

• Data bits = 8

• Parity = none

• Stop bit = 1

• Flow control = none

3.3

SNMP Community Strings

• Read = public

• Write = 1234

3.4

Console, Telnet Web Configurator and FTP Password

• User name: admin (web configurator)

• Password: 1234 (default)

3.5

G.SHDSL Ports (SAM1008)

• Encapsulation: RFC 1483

• Multiplexing: LLC-based

• VPI: 0

• VCI: 33

Chapter 3

Factory Default Settings

See also other documents in the category ZyXEL Communications Computer Accessories: