ZyXEL Communications ZyXEL DMA 1000 - Manual (Page 69)

IES-1000 User’s Guide
Bridge Commands 9-3
9.4.2 MAC filter Enable Command
Syntax:
192.168.1.1 bridge> macfilter enable []
where
= A bridge port number.
This command enables the MAC filtering feature on a specific port or on all ports if no port is specified.
9.4.3 MAC filter Disable Command
Syntax:
192.168.1.1 bridge> macfilter disable []
where
= A bridge port number.
This command disables the MAC filtering feature on a specific port or on all ports if no port is specified.
9.4.4 MAC filter Add Command
Syntax:
192.168.1.1 bridge> macfilter add
where
= A bridge port number.
= The source MAC address in "00:a0:c5:12:34:56" format.
This command adds a source MAC address fixed on a specified port. You may add up to five MAC addresses.
9.4.5 MAC filter Delete Command
Syntax:
192.168.1.1 bridge> macfilter delete
where
= A bridge port number.
= The source MAC address in "00:a0:c5:12:34:56" format.
This command removes a configured source MAC address from a port specified by you.