Xerox digital copier printer 5750 - Manual (Page 63)

2
2-35 PS Setup options
Allow Courier Substitution
Yes/No [Yes]
Specify whether to substitute Courier for fonts that are unavailable when you down-
load PostScript files to the DocuColor, or when you print a document for which you
do not have the corresponding printer font. If this option is set to
No , jobs with fonts
that are not available on the DocuColor hard drive generate a PostScript error and do
not print.
Print to PS Error
No/Yes [No]
Use this option to specify whether the DocuColor should print the available portion of
a print job when it encounters a PostScript error. Select
Yes to print the portion of the
job that was processed before the error occurred; select No to cancel the print job
entirely when a PostScript error is encountered. We recommend leaving this option at
No unless you encounter printing problems.
N OTE : If you intend to download fonts, be sure to set this option to No.
Enable Bypass Tray as Default
No/Yes [No]
Select Yes to specify that jobs should be printed from the bypass tray. Use this option
to enable printing from the bypass tray when tray selection is not otherwise available in
the interface, such as when printing from the command line (lpr or DOS). In general,
select
No when the interface permits tray selection on a job-by-job basis.
Enable Sorter as Default
No/Yes [No]
Select Yes to specify that jobs should be sorted by default. Use this option to enable
sorting when the Sorter option is not otherwise available in the interface, such as when
printing from the command line (lpr or DOS). In general, select
No when the interface
permits sorting on a job-by-job basis.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the PS Setup; select No to return to the main
Setup menu without making any changes.