Xerox digital copier printer 5750 - Manual (Page 50)

2
2-22 Setting up the DocuColor
Select NDS Tree
[List of trees]
Use the arrow keys to browse the list of NDS trees available to the DocuColor. Choose
OK when you have displayed the tree that contains the Printer, Print Server, and print
queue objects you have previously defined for the DocuColor.
Your new NDS tree selection automatically overwrites any previous tree selection. If
you change the NDS tree selection and there are also current Bindery settings, you are
alerted that they will be deleted. If you continue with NDS Setup, you can replace
Bindery settings afterwards. To exit NDS Setup, choose
Cancel or choose No in the
confirmation screen.
Network Setup
Service Setup
PServer Setup
NDS Setup
Before entering NDS settings, be sure the DocuColor is connected to the network
and you have already configured an NDS directory tree with a Printer, a Print
Server, and one or more Print Queue objects for DocuColor jobs (see page 3-4). To
perform NDS Setup you may need permission to browse the NDS tree. If access to
the Print Server is restricted, you’ll need a login password.
The main objective of NDS Setup is to specify the Print Server object. In addition,
you can indicate the location of the DocuColor print queues.
Note that the terms NetWare server, Novell server, and IPX server are in common
use and are used here interchangeably to mean the server on an IPX network
running Novell NetWare networking software.
Enable NDS
No/Yes [No]
Select Yes if the NetWare servers you will use to print to the DocuColor are running
NetWare 4.x in native mode.