Xerox digital copier printer 5750 - Manual (Page 40)

2
2-12 Setting up the DocuColor
Enable Source Routing
Yes/No [Yes]
Select Yes if your network supports source routing.
Source Routing
Request All Route
Yes/No [Yes]
This option appears only if you enabled Source Routing. Select Yes if you want the
Request packet to travel to its destination by all routes.
Network Setup
Port Setup
Ethernet Setup
Enable Ethernet
Yes/No [Yes]
Select Yes if you have Ethernet cabling connected to the DocuColor.
Ethernet Speed
Auto Detect/100 Mbps/10 Mbps [Auto Detect]
This screen appears only if the 100BaseT option is installed.
Select Auto Detect if your network environment is mixed, or select the speed
(10 Mbps or 100 Mbps) of the network to which the DocuColor is attached.
You must restart the DocuColor after changing the speed before resuming
operations.
Network Setup
Port Setup
Token Ring Setup
Enable Token Ring
Yes/No [No]
Select Yes if the DocuColor is to be connected to a Token Ring network.
Maximum Frame Size
(bytes)
4202/2154/1130/632 [4202]
Select the maximum frame size recommended by the network administrator at your
site. If you are uncertain of the setting to use, select the default value (4202).