Upnp discovery, Webdav – Xerox 7232 User Manual
Page 75
Using CWIS to Configure Settings on the Machine
Xerox WorkCentre 7232/7242 System Administration Guide
65
UPnP Discovery
This page allows you to configure the UPnP settings.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity]
folder.
3.
Select the plus symbol [+] to the left of the [Protocols] folder.
4.
Select [UPnP Discovery].
5.
Set up the following option displayed in the frame.
•
Port Number – Specify the UPnP port number.
6.
Select [apply] To reflect the new setting.
7.
Enter the user ID and passcode, and then select [OK].
NOTE: The default user ID is "11111" and the default passcode is "x-admin".
8.
When the reboot message appears, select [Reboot Machine].
WebDAV
This page allows you to configure the WebDAV settings.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity]
folder.
3.
Select the plus symbol [+] to the left of the [Protocols] folder.
4.
Select [WebDAV].
5.
Set up the following option displayed in the frame.
•
Port Number – Specify the port number.
•
Connection Time-Out – Allows you to specify the connection time-out period
when transmission fails.
6.
Select [Apply] to reflect the new setting.
7.
Enter the user ID and passcode, and then select [OK].
NOTE: The default user ID is "11111" and the default passcode is "x-admin".
8.
When the reboot message appears, select [Reboot Machine].