Xerox XK25C - Manual (Page 21)

6 Getting Started
4 Special Copy Press to set an option.
Fits multiple copies on one sheet (clone).
Auto Reduces or enlarges the original to fit paper size.
100% Makes a copy the same size as the original.
5 Copy Size/Scroll Press and hold one of these two buttons to reduce
or enlarge the copy size from 25% to 400% of the
original document in 1% increments. Also used to
scroll through the menu choices as shown in the
Display.
6 Diagnostic Lights up when colour cartridge ink level is low.
Display
LEDs
Lights up when black cartridge ink level is low.
Lights up when a paper jam occurs or the paper
feeder is empty.
7 Number of Copies Press to set the number of copies from 1 to 50.
8 B&W/Color Mode Press to select between black and white mode and
color mode.
Black and white mode
Colour mode
9 Percent button Press to change the Display. When this % light is
on, the Display shows the current copy size. When
the LED light is off, the Display shows the current
status of the machine.
10 Display Used to display machine status, copy size, menu
codes and error codes.
ª