Xantrex Technology XMP 2600 - Manual (Page 98)

Power Supply setup System parameters
System parameters
When a system parameter is selected (the cursor is placed over its name) on the
lower row of the display, the upper row shows the name of the parameter being
controlled and its selected value.
Setting
display
contrast
The contrast settings of the LCD display controls its readability in different viewing
angles.
How to get there
Use the LEFT / RIGHT selection keys to move the cursor to the DSPL parameter.
What is displayed
The upper row of the display shows the name of the parameter being controlled and
its selected value.
Display
contrast
system
symbol
system
parameters to set
condensed
modules status
Setup mode display – display contrast
How to select a value
Use the UP / DOWN selection keys to select the desired LCD contrast value in the
range 1 (minimum contrast) to 25 (maximum contrast).
Selecting
buzzer
behavior
Use this parameter to control the system’s audible alarm.
How to get there
Use the LEFT / RIGHT selection keys to move the cursor to the BUZ parameter.
What is displayed
The upper row of the display shows the selection for the audible alarm behavior.
system
symbol
system
parameters to set
condensed
modules status
Buzzer operation
selection
Setup mode display – buzzer setup
XMP 2600 User’s Guide rev. 1.0 79