Xantrex Technology XMP 2600 - Manual (Page 34)

Installation Power Module Replacement
23) When in the Set-Up Mode of operation, as you place the cursor over the
question mark (by using the left and right arrow keys), the unit will ask you if
this is a new module. Press the "ENTER" key to confirm.
24) The XMP 2600 will then read the module's parameters and ask the operator if
these are correct. Press the "ENTER" key to confirm. Turn off the unit.
25) The unit is ready to operate. Perform a second turn-on checkout in order to
confirm the new module operation (as explained in the next section).
XMP 2600 User’s Guide rev. 1.0 15