Western Telematic SRM-100 - Manual (Page 14)

4.2.4. Default Rings to Answer (Sw5)
SetUp Switch five selects the default “Rings to Answer” setting. The Rings to Answer setting
can also be defined via the Modem Parameters menu (/M). If the SRM-100 is reset to default
parameters, the Rings to Answer feature will return to the default setting selected by SetUp
Switch five.
Default Rings to Answer Sw5
One * Down
Eight Up
* = Factory Setting
4.2.5. Default ARQ/Compression Status (Sw6)
SetUp Switch six selects the default enabled/disabled status for the ARQ/Compression feature.
The ARQ mode and compression feature can also be enabled or disabled via the Modem
Parameters menu (/M). Note that if the SRM-100 is reset to default parameters, these features
will return to the default settings selected by SetUp Switch six.
Default ARQ / Compression Status Sw6
Enable * Down
Disable Up
* = Factory Setting
4.2.6. Default Modem Speaker Status (Sw7)
SetUp Switch seven selects the default enabled/disabled status for the modem speaker. The
Modem Parameters menu (/M) can also be used to enable/disable the speaker. Note that if the
SRM is reset to default parameters, this feature will return to the setting selected by SetUp
Switch seven.
Default Modem Speaker Status Sw7
On * Down
Off Up
* = Factory Setting
4-3
SRM-100 - Secure Rack Modem, User's Guide Hardware Installation