Western Telematic SRM-100 - Manual (Page 11)

When the "SRM>" command prompt is displayed, you can invoke the commands listed in the
Help Menu to display the various configuration menus and status screens. For the purpose of
this overview, it is only recommended to review the information on each menu in order to
familiarize yourself with the unit; it is not necessary to actually enter parameters at the
configuration menus at this time.
1. View/Set General Parameters: From the command prompt, type /G and press [Enter].
The General Parameters Menu will be displayed. This menu is used to set Console Port
communication parameters, define the System Password, and select other general
parameters as described in Section 5.2. Press [Esc] to return to the Main Menu.
2. View/Set Modem Parameters: Type /M and press [Enter] to display the Modem
Parameters menu. This menu is used to select communication parameters for the SRM's
internal modem as described in Section 5.3. Press [Esc] to return to the Main Menu.
3. Utilities Menu: Type /U and press [Enter] to display the Utilities Menu. This menu is
used to access SRM-100 command features, such as the Pass-Through Mode, the
Download Parameters Function, and others. Press [Esc] to return to the Main Menu.
4. Other Menus: At this point, commands such as "View Password Directory" and "View
Audit Log" will not display much information. This is due to the fact that the Password
Directory has not been defined yet, and the Audit Log has not had the opportunity to
record connection activity. If you wish to display these menus, key in the appropriate
command and then press [Enter]. To exit a menu, press [Esc] to return to the
Main Menu.
5. Exit/Disconnect: When you have finished exploring the various SRM command menus,
return to the "SRM>" Command Prompt, and then type /X and press [Enter] to exit from
command mode.
This completes introductory overview of the SRM-100. In order to demonstrate the SRM's
security functions, you must completely install the unit, and define the Password Directory as
explained later in this User's Guide. Please proceed to Sections 4 through 6 for complete
installation and configuration instructions.
3-3
SRM-100 - Secure Rack Modem, User's Guide Getting Started