Western Telematic MPC-20V Series - Manual

Meter, Monitor, Report & Control Power on Network Equipment
wti.com
Switched
Rack Mount PDUs
Model MPC-20VS30-1
3 kW @ 125V
Model MPC-20VS32-3
6.4 kW @ 250V
Power Control & Management:
 Remote Individual or Group Outlet Switching
 On/Off/Reboot/Default/Load Shed Switching
 Outlet Sequencing & Power Up Delays
 User-Defined Power-Up Default Status &
Outlet Status Retention
 Plug Naming, Grouping & Access Control
 Scheduled On/Off/Reboot Switching
 Ping Watchdog with Auto Reboot
Metering/Monitoring/Reporting:
 True RMS Current Metering
 Reports kWh, kW, Amps, Volts, Temperature
 Over-Current Alarms for Advanced
Branch Circuit Protection
 Over-Temperature Alarms
 Circuit Breaker Open Alarm
 Lost Communication Alarm
 Lost Voltage (Line In) Alarm
 Ping-No-Answer Alarm
 Invalid Access Lockout Alarm
 Power Cycle Alarm
 Alarm Notification via Email, SNMP, SYSLOG
 Alarm, Command, Access Audit, Current, Voltage,
Watts and Temperature Logging
Accessibility:
 In-Band (10/100Base-T Ethernet Port)
 Out-of-Band (External Modem Ready)
 Local (DB9 RS232 SetUp Port)
Security & Authentication:
 SSHv2 Encryption
 Embedded Validated FIPS 140-2 Cryptographic Module
 HTTPS/SSL Secure Web
 Remote Authentication:
LDAP/Kerberos/RADIUS/TACACS+
 Multi-Level Subscriber Directory with
Plug-Specific Password Protection
 IP Address Filtering
Unit Management:
 Command Line Interface (CLI) & Web-Based Graphic
User Interface (GUI)
 SNMP Control, Monitoring and Configuration with
Full MIB Support
 Multiple Concurrent SSH Sessions
 SSL Web Browser
 Modular & Expandable: Control Up to 80 Outlets
from a Single IP Address
Switched PDU
MPC Vertical Serie s
WTI’s MPC Series switched PDUs provide system administrators with
an efficient, intelligent power management solution that allows control
and monitoring of AC power supply to rack mount network elements.
A formidable array of security and authentication features ensure that
access to your critical network devices remains secure.
The MPC also includes easy-to-configure alarm functions, which can
monitor network elements for significant status changes, and then
promptly notify network managers via SYSLOG, SNMP Trap or email
when high current readings, high temperature, lost voltage and other
events are detected.
The MPC allows you to enable or disable outlets in remote racks,
initiate reboots at branch facilities and check power status at far-away
locations without leaving your office.
Cisco ®
EnergyWise
Enabled