Image smoothing, Image smoothing 7 – Tektronix Phaser Color Printer 750 User Manual
Page 16
Advanced Features and Troubleshooting Manual
7
Image Smoothing
Image Smoothing
Image Smoothing blends adjacent colors in low-resolution images for smoother color
transitions. For example, use Image Smoothing to improve the appearance of a 72-dpi
image downloaded from the World Wide Web. Image Smoothing is not recommended for
300-dpi or higher images.
There are four ways of selecting Image Smoothing (driver selections override all other
settings):
1.
In a supported driver, locate the Image Smoothing option:
■
LaserWriter 8.3.4 driver:
In the Print dialog box, click Options.
■
LaserWriter 8.6 driver:
In the Print dialog box, from the pull-down menu (General) select Printer
Specific Options.
■
Windows 95 / Windows 98 PostScript driver:
Start/Settings/Printers, then select Properties for your printer. In the Setup tab,
select Expert Options.
■
Windows 2000 driver:
From the Layout tab or Paper/Quality tab, click Advanced.
■
Windows NT driver:
From the Properties tab, select the Advanced tab. From the Document Options
tab, select Printer Features.
■
Adobe PS3 driver for Windows 3.1:
Select the Features tab options.
2.
Through the printer’s front panel; see the Menu Map for location.
3.
Through PhaserLink Printer Management software.
4.
Through one of the following PostScript utility files (see Printer Utilities on page 23
for instructions):
Macintosh
■
Image Smoothing On
■
Image Smoothing Off
PC
■
SMOOTHON.PS
■
SMOOTHOFF.PS