Tektronix Phaser Color Printer 750 - Manual (Page 106)

Advanced Features and Troubleshooting Manual 97
Regulatory Information for Phaser 750 Printers
Declaration of conformity
for 220-230 VAC equipment
Tektronix, Inc.
Color Printing and Imaging Division
P.O. Box 1000
Wilsonville, Oregon 97070-1000 U.S.A.
declares, under our sole responsibility, that the products
Phaser 750 printer (Z750)
to which this declaration relates, is in conformity with the following standard(s) or other
normative document(s):
Following the provisions of the Low Voltage Directive 73/23/EEC
EN 60950:1992
(IEC 950) Safety of Information Technology Equipment including Electrical Business
Equipment
Following the provisions of the Electromagnetic Compatibility Directive 89/336/EEC,
EN55022:1992
(CISPR 22) Limits and methods of measurement of radio interference characteristics of
Information technology equipment. Class B.
EN61000-3-2:1995
(IEC61000-3-2) Part 3: Limits - Section 2: Limits for harmonic current emissions (equipment
input current £ 16A per phase).
EN61000-3-3:1994
(IEC61000-3-3) Part 3: Limits - Section 3: Limitation of voltage fluctuations and flicker in
low-voltage supply systems for equipment with rated current £ 16A.
EN55024:1997 Information technology equipment – Immunity characteristics
– Limits and methods of measurement.
Immunity
Phenomena Basic Standard Test Specification Performance Level Criteria
Electrostatic
Discharge EC61000-4-2:1995 10 discharges minimum
each polarity per test
point 6kV Contact
12kV Air A
A
Radiated Rf
field, AM IEC61000-4-3:1995 80-100 MHz 3V/m,
80 percent
AM @1kHz A
Fast Burst
Transients IEC61000-4-4:1995 5/50 Tr/Th ns
5kHz repetition
frequency 0.5kV Signal Lines
1kV AC Mains A
A
Line Surge on
AC mains EC61000-4-5;1995 combination wave;
Tr=1.2uS, Th=50uS 2.0kV Com. mode
2.0kV Diff. mode A
A
Conducted RF,
AM EC61000-4-6;1996 0.15 to 80 MHz 3V, 80 percent
AM@1kHz
A