Tektronix Phaser 350 - Manual (Page 90)

3 Printing Basics
3-12 Phaser 350 Color Printer
Selecting printer options within an application: Page Setup
Note If changing the Printer Driver settings through Page Setup
causes problems with the application you are using, then change
the Printer Driver settings through Print under the File menu,
described on page 11.
1. Select Page Setup from the File menu; the Page Setup dialog box
appears.
2. Select Paper Size and Source.
Note Selecting Printer Folder Setting as the Paper Source uses the
default setting made under Document Defaults in the Printers
folder. To change this setting, select a different Source in
Page Setup
.
3. Click on the Printer button; another Page Setup dialog box
appears. You can select a different printer here.
4. Click on the Properties button; the Printer Document Properties
sheet appears.
5. Click the Advanced tab to change any printer features, including
TekColor. This tab displays the same information as the
Document Defaults Properties
Advanced tab.
6. Click the Page Setup tab to see other features. This tab displays
the same information as the Document Defaults Properties Page
Setup
tab.
Note Changes to any of these settings overrides the Default Printer
Properties
settings in the Printers folder.