Tektronix Phaser 350 - Manual (Page 42)

2 Getting Set Up
2-26 Phaser 350 Color Printer
1. Plug the power cord into the printer and into a grounded outlet.
2. Turn on the printer.
Note To ensure optimum printing performance and best ink economy,
leave the printer turned on overnight and during weekends. The
printer automatically switches into a standby mode to reduce
power consumption during periods of infrequent use.
As the printer warms up
The first time you turn your printer on, it will take about 15 minutes to warm
up. The printer’s front panel displays a percentage value to indicate its
progress. The warm-up cycle is complete when the front panel displays
100%.
As the printer initializes, you will hear a series of start-up noises that are
normal and are not an indication of problems with the printer. During
warm-up, the printer outputs a cleaning page as part of its initialization.
The printer is available for printing when it displays
Ready or the printer’s
name.
9101-10
1